Model No.: PE19DA
Rated Power: 13-18Watts
Input Voltage: 100-250V
Output Voltage: 2-24V, 2-42V, 2-65V,2-60V
Output Current: 0-700mA, 0-400mA, 0-280mA, 0-300mA
Power Factor: 0.96PF
13W-18W DALI Dimmable LED Driver Constant Current DALI/PUSH with SAA CE Approval No Flicker
Attentions for DALI dimming driver with PUSH function
1. When the power supply does not connect DALI signal, the power will activate the PUSH function and will not return to the DALI state, so when the DALI function of the DALI dimming driver will be used, the signal line needs to be first connected, then turn on it, at last turn on the power supply.
2. When the DALI signal line is dropped, the power supply will activate the PUSH function. At this time, the DALI dimming driver needs to be turned off ,then turn on the power supply after reconnected the DALI signal, .
3. when the power works in the PUSH mode, the following phenomena will appear:
A.The DALI dimming driver will memory the last turn off state in the PUSH mode, e.g. off, low brightness
B.The DALI signal is connected, and the power address is not found.
Features:
- Standard DALI dimming interface
- With PUSH function to realize PUSH dimming
- Output flicker free
- International universal AC input voltage (up to 265VAC)
- With the active PFC function
- Protections: short circuit/over voltage/over current
- Natural cold wind
- Big terminal locked by screw
- Suitable for LED home lighting and commercial lighting
- Safe no load protection device
- Economic and convenient installation
- Conform to the world lighting equipment safety standards
- Protection class II
- Three years warranty
Model No |
PE19DA24 |
PE19DA42 |
PE19DA48 |
PE19DA60 |
PE19DA65 |
||||
Output |
Rated power |
16.8W |
16.8W |
16.8W |
18W |
18.2W |
|||
Open circuit voltage |
27V |
52V |
52V |
70V |
70V |
||||
Constant current range |
2-24V |
2-42V |
2-48V |
2-60V |
2-65V |
||||
Current accuracy |
±3% |
±3% |
±3% |
±3% |
±3% |
||||
MaxConstant current |
700mA |
400mA |
350mA |
300mA |
280mA |
||||
Ripple |
350mVp-p |
400mVp-p |
500mVp-p |
500mVp-p |
500mVp-p |
||||
Input |
Voltage range |
100~250VAC |
|||||||
Frequency range |
47~63Hz |
||||||||
Power factor correction |
PF>0.95/220VAC, PF>0.99/110VAC |
||||||||
Efficiency (Typ.) |
84% |
84% |
86% |
86% |
86% |
||||
Alternating current |
0.095A /220VAC 0.18A/1100VAC |
||||||||
Leak current |
<0.25mA /230VAC |
||||||||
Environment |
Operating temperature |
-40~ +60℃ |
|||||||
Operating humidity |
20-85%RH |
||||||||
Storage temperature humidity |
-40~ 85℃ 10~95%RH |
||||||||
Temperature coefficient |
±0.03%/℃(0-60℃) |
||||||||
Safety and electromagnetic compatibility |
Safety standard |
EN 61347-2-13:2006 /EN 61347-1:2008 |
|||||||
Withstand voltage |
I/P-O/P:3.75KVAC |
||||||||
Insulation resistance |
I/P-O/P:100M Ohms / 500VDC /25℃/70%RH |
||||||||
Electromagnetic interference |
EN55015 |
||||||||
harmonic current |
EN6000-3-2/EN6000-3-3 |
||||||||
Electromagnetic susceptibility |
EN6000-4-2 |
||||||||
Other |
dimension |
(L*W*H) = 135mm * 43.5mm *27mm |
|||||||
package |
|
Your Contact Details To Us
Your E-Mail:*
Fax Number:
Your Company:
Your Homepage:
Your Name:
Tel Number:
Your Inquiry To Us
Subject:*
Content:*
Rated Power:150W
Input Voltage:200V-250V
Rated Power:30-45W
Input Voltage:200-250V
Rated Power:3-12Watts
Input Voltage:200-250V
Rated Power:3W-12W
Input Voltage:200-250V
Rated Power:18-30Watts
Input Voltage:200-250V
Rated Power:18W-30W
Input Voltage:200-250V
Rated Power:120Watts
Input Voltage:200-250V
Rated Power:120Watts
Input Voltage:200-250V