Products
Home >> Products >> Dali LED Dimmable CC Drivers >> 3-12Watts Dali Dimmable LED Driver Constant Current DALI/PUSH No Flicker for DALI System or Panel Ceiling Spot light Downlight
3-12Watts Dali Dimmable LED Driver Constant Current DALI/PUSH No Flicker for DALI System or Panel Ceiling Spot light Downlight

Model No.: PE12DA

Rated Power: 3-12Watts

Input Voltage: 100-250V
Output Voltage: 2-24V, 2-42V
Output Current: 0-350mA, 0-300mA

Power Factor: 0.6PF

  • Product Detail
  • Send Inquiry
  • Download
  • Product recommendations

 Attentions for DALI dimming driver with PUSH function

 1. When the power supply does not connect DALI signal, the power will activate the PUSH function and will not return to the DALI state, so when the DALI function of the DALI dimming driver will be used, the signal line needs to be first connected, then turn on it, at last turn on the power supply.

 2. When the DALI signal line is dropped, the power supply will activate the PUSH function. At this time, the DALI dimming driver needs to be turned off ,then turn on the power supply after reconnected the DALI signal, .

 3. when the power works in the PUSH mode, the following phenomena will appear:

 A.The DALI dimming driver will memory the last turn off state in the PUSH mode, e.g. off, low brightness  

 B.The DALI signal is connected, and the power address is not found.


  Features: 

-  Standard DALI dimming interface
-  With PUSH function to realize PUSH dimming
-  Output flicker free
-  International universal AC input voltage (up to 265VAC)
-  With the active PFC function
-  Protections: short circuit/over voltage/over current
-  Natural cold wind
-  Big terminal locked by screw
-  Suitable for LED home lighting and commercial  lighting
-  Safe no load protection device
-  Economic and convenient installation
-  Conform to the world lighting equipment safety standards
-  Protection class II
-  Three years warranty

  Electrical specification:

Model No

PE12DA24

PE12DA42






Output

Rated power

8.4W

12.6W

Open circuit voltage

27V

52V

Constant current range

2-24V

2-42V

Current accuracy

±3%

±3%

MaxConstant current

350mA

300mA

Ripple

350mVp-p

400mVp-p

Input

Voltage range

100~250VAC

Frequency range

47~63Hz

Power factor correction

PF>0.95/220VAC, PF>0.99/110VAC

Efficiency (Typ.)

84%

84%

Alternating current

0.095A /220VAC      0.18A/1100VAC    

Leak current

<0.25mA /230VAC

Environment

Operating temperature

-40~ +60℃

Operating humidity

20-85%RH

Storage temperature humidity

-40~ 85℃   10~95%RH

Temperature coefficient

±0.03%/℃(0-60℃)

Safety and electromagnetic compatibility

Safety standard

EN 61347-2-13:2006 /EN 61347-1:2008

Withstand voltage

I/P-O/P:3.75KVAC

Insulation resistance

I/P-O/P:100M Ohms / 500VDC /25℃/70%RH

Electromagnetic interference

EN55015

harmonic current

EN6000-3-2/EN6000-3-3

Electromagnetic susceptibility

EN6000-4-2


Other

dimension

(L*W*H) = 135mm * 43.5mm *27mm

package




Your Contact Details To Us

Your E-Mail:*

Fax Number:

Your Company:

Your Homepage:

Your Name:

Tel Number:

Your Inquiry To Us

Subject:*

Content:*

Agree with this Privacy Policy

Stay With Us, You Can SAVE MORE
Follow us
Newsletter